Equipment » Wave Solders/Soldering
Lead Free Wave Solder
|
EAS Control Number:
2375
|
Model Number: 460
Control System: Complete Dell configured computer control system
PCB Specifications: Max. Length: 30" +/- 0.75", Max. Width: 460 mm (18"), Angle: adjustable between 4 degrees and 7 degrees
Conveyor System: Titanium finger conveyor with input board guides, finger cleaner, and (optional) center board support. Computer controlled adjustable speed from 4"-80"/ min
Pre-heating Zone(s): Three Forced Air Convection bottom Pre-heaters, Total length:1800mm (70"), Two Topside Reflectors, Temperature range adjustable from room temperature to 230C
Lead-Free Solder Pot: Complete Titanium Dual Wave, Roll Out Solder Pot. Temperature range adjustable from room temperature to 350C
Computer controlled width and wave height adjustment
Internal Spray Fluxer: Computer controller pressure: 5-6kgf/cm and flow rate: 10-100ml/min, Capacity Approx: 20 liters
Solder Pot Capacity Approximately 400kg(1,000 1bs)
Power Consumption Approximately 8 KvA during normal running conditions and 30 KvA at full load Start-Up
Power Supply: 3 phase, 5 wires, 380V, 50/60Hz standard, Also configured to 208-220 or 440-480 Volt US
Outside Dimension(s) Length - 4300 mm x Width - 1350 mm x Height - 1720 mm
Control System: Complete Dell configured computer control system
PCB Specifications: Max. Length: 30" +/- 0.75", Max. Width: 460 mm (18"), Angle: adjustable between 4 degrees and 7 degrees
Conveyor System: Titanium finger conveyor with input board guides, finger cleaner, and (optional) center board support. Computer controlled adjustable speed from 4"-80"/ min
Pre-heating Zone(s): Three Forced Air Convection bottom Pre-heaters, Total length:1800mm (70"), Two Topside Reflectors, Temperature range adjustable from room temperature to 230C
Lead-Free Solder Pot: Complete Titanium Dual Wave, Roll Out Solder Pot. Temperature range adjustable from room temperature to 350C
Computer controlled width and wave height adjustment
Internal Spray Fluxer: Computer controller pressure: 5-6kgf/cm and flow rate: 10-100ml/min, Capacity Approx: 20 liters
Solder Pot Capacity Approximately 400kg(1,000 1bs)
Power Consumption Approximately 8 KvA during normal running conditions and 30 KvA at full load Start-Up
Power Supply: 3 phase, 5 wires, 380V, 50/60Hz standard, Also configured to 208-220 or 440-480 Volt US
Outside Dimension(s) Length - 4300 mm x Width - 1350 mm x Height - 1720 mm
